General Electric GE Technical Information Series & Data Folder 1950s Lot of 33

General Electric GE Technical Information Series & Data Folder 1950s Lot of 33

Folders (binders) with loads of technical information inside, from GE from the 1930s to 1950s-  , 2) Data Folder (DF) Stresses and Deflections of Three-Dimensional Pipe Bends, 3) Transient and Steady-State Temperatures in a Liquid Metal Cooling System by Ingard Clausen Jr, 4) TIS Noise Analysis Technique by RJ Wells, 5) Parabolic Reflector as a Directional Microphone, 6) Aerodynamic Noise Survey Report by J Burgess, 7) Stress Analysis of Generator Lifting Plates by PH Baker, 8) Vibration of a Shallow Spherical Shell with Center Bore by DJ Herder, 9) A method to determine the natural frequencies of a vibrating spherical shell by AE Seddon Jr, 10) Natural Frequencies of Bars Subjected to Tension, 11) A Qualitative Analysis of the Basic Voltage Stabilizer Circuits by RJ LaPlante, 12) Gyroscope Motion by H Poritsky, 13) An Experimental Investigation of the Response Characteristics of a Hydraulic Amplifier, 14) Gyroscopic Effects on the stability of rigid rotors suspended by flexible shaft by EH Freiburghouse, 15) Magnetic Escapement Development Second Stage by RP Alley, 16) Investigation of Machine-Tool Contour Follower, 17) Motor Lamination Stresses due to Shrink Fit Rotation and Temperature Differences by RG Rhudy, 18) Psychoacoustics vs Measurement a preliminary study with automobile clocks.  19) Useful Numerical Aids for Engineers, 20) Steam Turbine Governor Using Oil Links by CR Heising, 21) Impedance of Single-Turn Coils for High Frequency Induction Heating by MA Head, 22) Use of the Ground as a source for the Heat Pump, 23) Fundamental Investigations of Refrigerating Systems, 24) Theoretical Analysis of the Motion of a Piston Driven Hydraulically by Means of a Control Valve, 25) Performance Calculations for the Telechron type B-3 Timing Motor, 26) Heat Pump Analysis of Size Required for heating a building versus outdoor temperatures- outdoor air heat sources, 27) Color Register Control-Fundamentals of System Operations, 28) Investigation of Machine Tool Contour Follower, 29) The Air Source Heat Pump- a Proposal for Improvement, 30) Magnetic Noise in an Induction Alternator, 31) Supplement to R51AE14- Motor Design, 32) Analysis of an Electrostatic Wind Device, 1) Investigation of Machine-Tool Contour Follower.  Great reference. .